©1998-2010 Griff Wason | All rights reserved. All trademarks and trade names acknowledged.

Yes, I have a dreaded questionnaire. But, don’t panic! It’s quite short and painless, and you don’t even have to type anything, unless you really want to... ALL information received will be treated in the strictest confidence. And, positively NO SPAM here! We hate it as much as you do! We sure get enough!

Anyone kind enough to respond will have their name put in an electronic hat, and the winner will receive the results of my labour! “What’s second prize”, I hear you say...

Go on, you know you want to...
Please click on the Triplane to start.

Le Rhône 80hp Rotary Engine

Comments:

A personal project, and to be honest a labour of love. I have had a fascination with rotary aero engines as long as I can remember. My first sight was as a young lad with my late father at the London Science Museum, and I was enthralled as he explained how the entire engine rotated around the stationary crankshaft. They have held my attention ever since, and I have even made a few examples.

History
Louis Verdet designed a small experimental rotary engine in 1910. Then, in 1912 he developed a larger 7-cylinder design, the 7C, which developed 70 hp with an engine weight of 90 kg. This proved much more popular. Louis formed the Société des Moteurs Le Rhône later that year. He quickly followed the 7C with the larger Le Rhône 9C (as illustrated), a 9-cylinder design delivering 80 hp (60 kW). Compared with the competitive Gnome engines, the Le Rhône 9C was considerably more conventional, using copper pipes to bring the fuel to the top of the engine, along with intake and exhaust valves.

As with the Gnome, the Le Rhône designs were widely licensed, and in the case of the 9C was produced in Germany (by Oberursel, whose Le Rhone engine copies received an ‘UR’ prefix), Austria, Britain and Sweden.

After several years of fierce competition, Gnome and Le Rhône finally decided to merge. Negotiations started in 1914, and on January 12, 1915, Gnome bought out Le Rhône to form Société des Moteurs Gnome et Rhône. Developments of the 9C continued to be their primary product, improving in power to about 110 hp (80 kW) in the 9J by the end of the war.

The 9-series was the primary engine for most early-war designs, both in French and English service, as well as in Germany where, perhaps somewhat ironically, Oberursel had taken out a license just before the war.

Le Rhône rotary engines were produced in large scale numbers in France, UK and Sweden.  The Union Switch and Signal Company in Swissvale, Pennsylvania also manufactured these types.  The Le Rhône used less fuel and oil than the contemporary Gnome and was cheaper, lighter and could idle smoothly at low R.P.M.s

Operation
The Le Rhône had a conventional induction system and an ingenious method of connecting the piston link rods to the master rod. In the Le Rhône, the fuel mixture went first to an annular chamber at the back of the crankcase, and then by swept copper pipes, to conventional intake ports and cam-operated valves in the cylinder heads. The Le Rhône used a sophisticated slipper bearing system. The master rod had three concentric grooves to take slipper bearings from all the other cylinders. The master rod was a split-type to allow assembly of the connecting rods. The remaining rods carried bronze shoes, shaped to fit in the grooves, at their inner ends. Counting the master rod as no. 1, the shoes of no's. 2, 5, and 8 rode in the outer groove, 3, 6, and 9 in the middle groove, and 4 and 7 in the innermost groove. Although complex the LeRhône worked very well.

Le Rhône’s employed an unusual method of valve actuation. A single rocker arm, pivoted near its centre, was made to operate both the exhaust valve and the intake valve. Pulled down, it opened the intake valve; pushed up, it opened the exhaust. To do this, the rocker had to be actuated by a push-pull rod instead of by the usual pushrod. This, in turn, meant that the cam followers had to have a positive action and a system of links and levers accomplished this. This system works well enough-some makers used it up to the late twenties-but its use makes overlap of valve openings impossible. In an engine designed for high power and speed, the intake valve begins to open before the exhaust valve is quite closed, but on the Le Rhône, the rocker arm must clear the exhaust before it can contact the intake. While this puts a limit on power output, it is not necessarily a fault. As it was, most Le Rhône models produced all the power that their structural strength and cooling arrangements could cope with.

Slipper bearing system
Although remarkable, the Le Rhône used a sophisticated slipper bearing system. Its master rod had three concentric grooves to take slipper bearings from the remaining eight connecting rods. The master rod was a split-type to aid assembly. The remaining rods carried bronze shoes, shaped to fit in the concentric grooves, at their inner ends. Counting the master rod as no. 1, the shoes of no's. 2, 5, and 8 rode in the outer groove, 3, 6, and 9 in the middle groove, and 4 and 7 in the innermost one. In spite of their complexity, thousands of Le Rhône’s were built and proved extremely reliable. Even today, it is possible to turn one of these 90 plus year-old engines over by hand and feel it moving as smooth as silk.

Valve actuation
Le Rhônes engines employed an unusual method of valve actuation. A single rocker arm, pivoted near its centre, was made to operate both the exhaust and intake valves. In the ‘down’ position, it opened the intake valve; the ‘up’ position opened the exhaust. To achieve this, the rocker arm had to be actuated by a push-pull rod. This meant that the cam followers had to have a positive action, and a system of links and levers to accomplish this. This system proved popular up to the late 1920’s. But its use makes overlap of valve openings impossible. In an engine designed for high power and speed, the intake valve begins to open before the exhaust valve is quite closed, but on the Le Rhône, the rocker arm must clear the exhaust before it can contact the intake. While this puts a limit on power output, it is not necessarily a fault. As it was, most Le Rhône models produced all the power that their structural strength and cooling arrangements could cope with.

Le Rhône 80-hp models were made under license in the United States by a Pennsylvania firm, Union Switch and Signal. Oberursel made the 110-hp model, supposedly without authorization in Germany. The Oberursel U.R. II was a straight copy of the Le Rhône but the Le Rhône was preferred over the Oberursel due to the superior materials used over the home product. However, there were reports in July, 1918 that there was a shortage of Castor Oil which the rotaries required. A new Voltol-based lubricant was substituted and was blamed for a rash of engine failures on Fokker E.V using the Oberursel U.R. II rotary engine. It has been suggested that without the proper lubricants, the Le Rhône rotary would have been equally failure prone.

Technical Specs.

Your chance to comment:

Dear viewer,

Please excuse me busting in here... I really hope that you are enjoying my Le Rhône Rotary Engine and associated Fokker Dr.1 Triplane artwork, as well as all the other aerospace related pieces - engines etc.

I have a small favour to ask you.

I have been studying the Fokker Dr.1 Triplane on and off for at least 25 years! I receive SO many questions relating to the Triplane that I have decided to create something more tangible after all this time!

I am currently working on a project to provide much more information about the legendary Fokker Dr.1 Triplane, and its associated engines - full history, plans, full cutaways, schematics, the works!  

With all new technical artwork, and in the longer term - if successful - other historically important aircraft and engines as well.

However, I really need to understand exactly what kinds of information would be of most interest to all you folks out there.

To achieve this, I have to ask that you help me, and maybe even help yourself in the long run about what it is that interests you, and what information you are looking for.